Welding and Machinery Aust.

New stock arriving Mid May This MP1412 can be used for positioning torches. Options include manual or powered slides, oscillator and torch brackets. Please note torch brackets shown in the last 2 photos are avaliable at an extra cost.

In Stock 100 x 100mm 50kg load rated 100 x 100mm 25kg load rated Please note we can make to order slides for your requirements Each Set includes Control Box Pendant With Joystick and Speed Adjustment Power Lead 240volt

10kg-75kg in stock can get larger sizes if needed 3 phase and single phase available

THis unit is made to order, 8-12 week lead time. 5 Ton Manual Height Adjustable Positioner Load Capacity 5000kg Table Diameter 1500mm Can be Adjusted using a crane to lift the frame and the pins reinserted. This Positioner is a new design from our company. We designed this equipment according to our experience and the advantages of competitors product. It has two functions, rotating and overturning. It can place the work piece at best welding position by overturning function, and achieve automatic welding of circumferential seam. The speed is variable frequency control, to suit custo...

Brand new in stock The turning rollers can be applied on round shaped work pieces, such as tanks, drums, pressure and cylindrical vessels and pipe to do the sequential circumferential rotation. Specifications Model W.A.M WHT-1 Turning Rolls Load capacity Read as power idler 1000 Kg Min pipe size mm 50mm Max pipe size mm 500mm Incoming supply 240 50Hz 1ph Control voltage v 24 VAC

New model, just arrived into stock. Comes with one drive unit, idler unit and single foot pedal. Capacity 500KG Minimum Diameter 50mm Maximum Diameter 1000mm Roller Speed 0-4420mm min Power 240volt single phase

Made to order eta 60 days 5 Ton Capacity 1500mm table Wireless Pendant Sits just 487mm off the ground Earth 500amps

Brand new 1.2Ton positioner, very well made featuring Schneider electrics and invertek motors. Model HBJ1.2 Pendant Control 24VAC circuit, push button with 4 metre cable Input voltage 415V 3phase 50-60Hz Rotation Capacity 1.2 metric tons at 200mm Rotation Speed 0.05-0.5 rpm Tilting Capacity 1.2 metric tons at 250mm c of g Tilt Range 0 to 135 Degrees Tilt Speed 135 degrees in 50 seconds Rotation Drive Motor 1.1 KW motor Rotation Drive Control 1.1 KW AC inverter Tilt Drive Motor 1.5 KW motor c w brake Weight 1100kg Positioners are designed to orient the work-piece at an optimum positio...

ETA August 2020 Brand new 2 Ton positioner, very well made featuring Schneider electrics and invertek motors. Model HBJ20 Pendant Control 24VAC circuit, push button with 4 metre cable Input voltage 415V 3phase 50-60Hz Rotation Capacity 2 metric tons at 200mm Rotation Speed 0.05-0.5 rpm Tilting Capacity 2 metric tons at 300mm c of g Tilt Range 0 to 135 Degrees Tilt Speed 135 degrees in 50 seconds Rotation Drive Motor 1.1 KW motor Rotation Drive Control 1.1 KW AC inverter Tilt Drive Motor 1.5 KW motor c w brake Weight 1500kg

Brand new 3 Ton positioner, very well made featuring Schneider electrics and invertek motors. Model HBJ30 Pendant Control 24VAC circuit, push button with 4 metre cable Input voltage 415V 3phase 50-60Hz Rotation Capacity 3 metric tons at 200mm Rotation Speed 0.05-0.5rpm Tilting Capacity 3 metric tons at 300mm c of g Tilt Range 0 to 135 Degrees Tilt Speed 135 degrees in 50 seconds Rotation Drive Motor 1.5 KW motor Rotation Drive Control 1.5 KW AC inverter Tilt Drive Motor 2.2 KW motor c w brake Weight 2200kg

Brand new in stock, this price includes 1 drive unit and 3 idler units. Suitable for diameters up to 7600mm and down to 470mm. With a turning capacity of 150ton, these rotators are more than adequate for those large jobs. Drive unit comes with a remote pendant. 415 Volt 3 Phase Roller speed 130-1300mm min Please note in the photo the drive and idler units are stacked for transport.

New Design to suit workpieces up to 4 Ton, Suitable for diameters from 9-1400mm. These turning rollers can be applied on round shaped workpieces, such as tanks, drums, pressure and cylindrical vessels. Includes 1 drive unit, 1 idler and a double foot control